Insignia TV Converter Box NS DXA1 User Manual

Quick Start Guide NS-DXA1

Package contents

Digital-to-analog converter box

Remote control

AAA battery

Coaxial cable

RCA audio/video cable

Install remote control battery

Remove the cover from the back of the remote control, insert the battery as shown,

then replace the cover.

Connect to antenna and TV

ANTENNA

INPUT

Method 1 (Better)

Connect the antenna to the IN (FROM ANT) jack on your converter box using a

coaxial cable.

Connect the R AUDIO, L AUDIO, and VIDEO jacks on your converter box to the

corresponding jacks on your TV using an A/V cable. TV should be tuned to correct

video source (see your TV documentation).

Plug the power cable into a power outlet or surge protector.

This is the preferred method for the best video and audio quality.

Converter Box

ANTENNA

INPUT

Method 2 (Good)

Connect the antenna to the IN (FROM ANT) jack on your converter box

using a coaxial cable.

Connect the OUT (TO TV) jack on your converter box to the Antenna IN jack

on your TV using a coaxial cable. Your TV must be tuned to channel 3. For best

performance with this connection, change the Audio Output option in the

Options menu to Mono. For more information, see “OPTION menu”on page 9 in

your User Guide.

Converter Box

Plug the power cable into a power outlet or surge protector.

08-1161_NS-DXA1QSG_eng.indd

3/8/2008 7:47:04 AM