Philips Portable DVD Player PET941D
2
Enjoy (AV OUT)
Connecting additional equipment (TV for
example)
Quick start guide
1 Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown
directly.
1
2
Enjoy (Disc operation)
Charge your battery
2 Switch on the TV and set to the correct video-
in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
RF modulator. Please consult your dealer.)
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in
the power-off mode).
TV
1 Open the lid of the player.
White
Not supplied
2 Slide the POWER switch to ON to switch on
the DVD player.
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜ The CHR indicator turns red.
➜ When the battery is fully charged, the
indicator turns off.
AUDIO IN
Red
Yellow
➜ The
indicator turns on.
VIDEO IN
3 Slide OPEN2 on the player.
4 Remove the protective card (if any) and load a
disc with the label side facing up.
5 Close the disc door.
➜ Playback will start automatically. If not, press
3 Disconnect the power adaptor cord (or the
car adaptor) when the CHR indicator turns off.
2;.
6 To stop playback, press 9.
Note:
Note:
During play, you can:
–You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
– Press OPTION to select some play options: audio,
subtitle, repeat, and time display.
– Press
directly to adjust brightness of screen
backlight to match lighting conditions.
PET941D_37_QSG_V1.0
WK0919
|