PET825_QSG_wk6372.qxd 2006-09-18 19:08 Page 1
wk6375
Philips Portable DVD Player PET824
Quick start guide
3
2
1
Connect to TV
Enjoy
Charge
1
1
1 Switch OFF the set. Attach the battery pack as
shown.
White
Red
Yellow
6
1 Connect the set to TV as shown.
2 You can hear clear ‘click’ sound when it is
5
2
8
4
successfully attached.
4
2
3
1 Open the lid.
2 Switch ON the set.
3 The GREEN light turns on.
4 Open the DVD door using the OPEN switch.
5 Remove protective card (if any).
6 Load the DVD disc.
7 Close the DVD door and the set will
automatically start to playback.
2 On the DVD player panel, press AV
IN/OUT repeatedly until you see A/V OUT
on the LCD screen.
3 Please select appropiate input or source on
the TV. You can consult the owner’s manual
of your TV. (If your TV does not have Audio
and Video inputs, you will need to purchase
a RF modulator. Please consult your dealer.)
3
3 Connect the supplied adapter to the set and
the AC outlet.
4 RED light turns on.
5 The battery pack will be fully charged in
approximately 5 hours. When the RED light
goes out, it means that the battery pack is
fully charged.
8 Use control keys on the set or remote control.
TIP Your battery will continue to charge while
the player is in use. However, the RED light
will not be lit and it will take approximately 16
hours to fully charge the battery pack.
PHILIPS
3 OPEN HERE
|